When should the clutch kits replacement need to be done?

Clutch kits is normally divided into clutch pressure plate assembly, driven plate assembly and clutch release bearing. How often is the clutch kits in three need to be replaced?

clutch cover replaced 300x169 - When should the clutch kits replacement need to be done?

1. the pressure plate within the clutch kits

The pressure plate is a metal disc(main raw material is HT250 and steel plate), the normal state is closely integrated with the clutch plate as a whole part, rapid rotation with the engine, and transfer power to the gearbox.

DSC 4344 C0004 300x251 - When should the clutch kits replacement need to be done?

2. Clutch driven plate within the clutch kits

Clutch driven plateis the vulnerable parts in the motor vehicle driving system (divided into cars, motorcycles and other mechanical transmission equipment vehicles, etc.), drivers should pay more attention when the engine is running, the foot should not always put on the clutch pedal.

3182600101 - When should the clutch kits replacement need to be done?

3. Clutch release bearing within the clutch kits

The clutch release bearing  is installed between the clutch and the transmission, the release bearing  seat is tightly set on the tubular extension of the first shaft bearing cover of the transmission, and the convex shoulder of the release bearing  is always against the clutch fork through the return spring, and back to the last position, and the separation lever end (separation refers to) maintain a clearance of about 3~4mm.  

CK9816 300x241 - When should the clutch kits replacement need to be done?

When should the clutch kits need to be replaced?

Acceleration is obviously underpowered; The vehicle starts shaking; Shifting difficulty; Increased fuel consumption;  

First, clutch kits slipping! The engine speed is running highly when starting uphill, but feel weak.  

Second,clutch shaking! Replace the clutch driven plates and clutch cover, because of the old pressure plate will wear the clutch disc. It’s better to replace the clutch release bearings too because it may be broken or leakage with air and oil. The working hours are expensive, so it is suggested to change the three together.  

istockphoto 1166808258 612x612 1 300x200 - When should the clutch kits replacement need to be done?

Car clutch pressure plate replacement

Clutch kits replacement is no time limit,and regular car inspections can make the car safer. 

TZ clutch supplies is your best partner with providing best solution for transmission products!

Relative articles:Clutch slip fault analysis